SP-7X 7,000-lb. Capacity, Scissors, Frame Engaging
BendPak SP-7X scissor lift
The SP‐7X surface mount full‐rise scissor lift won't hog your precious floor‐space and fits nicely into narrower bays. This space-saving frame engaging lift easily accommodates most passenger vehicles. Let the SP-7X take those vehicles, and your bottom line, to new heights.

    When you need to add versatility and productivity to your shop or garage, your first stop should always be BendPak. The SP-7X is the mighty 7,000-lb., full-rise scissor lift that won't hog your precious floorspace and fits nicely into narrower bays. A frame engaging lift, it easily accommodates most passenger vehicles and light trucks and comes replete with pneumatic safety locks, rubber lifting blocks and an open center for full under-car accessibility. Always bet on BendPak for increased durability, safety and productivity. You aren't going find comparable quality or value anywhere else—BendPak always bests the rest.


    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Dual-cylinder design
    Each scissor lift is equipped with 2 hydraulic cylinders for maximum performance, reliability and precise leveling. The dual-cylinder design maintains constant level and safety using cross flow hydraulic technology, pressure flow control and integrated velocity fuses. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-designed high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Large base frame
    Heavy boxed-steel formed base frame provides solid stability. See the flush-mount dimensions here.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.

    Flush mount dimensions for the SP-7X
    • 7,000-lb. lifting capacity
    • Pneumatic safety locks
    • Equalization torsion bar
    • Hardened pivot pins with "Zirk" fittings
    • Open-center design
    • Ergonomic controls
    • Dual-cylinder hydraulic design provides extra power
    • Low-profile

      button-floorplan-bendpak-uk.jpg

      button-car-lift-guide-bendpak-uk.jpg

      button-safe-balancing-bendpak-uk.jpg

      button-top-10-buyers-guide-bendpak-uk.jpg


    • Lifting capacity: 7,000 lbs. / 3,175 kg
    • Max lifting height: 68" / 1,727 mm
    • Overall length: 163-1/2" / 4,153 mm
    • Overall width: 74-1/2" / 1,892 mm
    • Lift platform: 21-1/2" x 63" / 47 mm x 1,600 mm
    • Lowered height: 5" / 127 mm
    • Width between pads: 31-1/2" / 801 mm
    • Lifting time: 45 sec
    • Motor: 208-240 VAC / 50-60 Hz / 1 Ph
    • Shipping weight: 2,318 lbs. / 1,054 kg
    • Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. Consult www.autolift.org for complete listings or contact BendPak via: contact@bendpakranger.co.uk

    BendPak SP-7X scissor lift
    BendPak SP-7X scissor lift
    Lowered SP-7X scissor lift with power unit console
    Scissor Lift SP-7X power unit console with controls
    SP-7X safety release assembly

    Featured accessories for the SP-7X


    deliverydetails.jpg

    Request More Info on the SP-7X!

    Quick Specs

    Lifting capacity: 7,000 lbs.
    Lifting height: 68"
    Lowered height: 5"
    Overall length: 163-1/2"
    Overall width: 74-1/2"
    Lifting time: 45 sec
    Shipping weight: 2,318 lbs.
    View Full Specs »
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Feedback | Social Connect | FTP | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk