HD-7PXN 7,000-lb. Capac. Super-Tall Narrow High Speed Car Lift
BendPak HD-7PXN is super tall lift
The HD-7PXN is literal giant. This 4 post car lift will effortlessly lift up to 7,000 lbs. over 12' into the air. Perfect for stacking taller vehicles. The HD-7PXN is the narrow model of this super tall lift.

    BendPak's HD-7PXN is a super-tall, four-post, runway-style lift platform designed for professional use in service bays. A true lifting powerhouse, this high-speed car lift will easily lift 3-1/2 tons to heights exceeding 12'. Now you can finally store your high-profile trucks, utes, vans and Winnebagos.

    Dependable design
    4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this car lift the most durable, maintenance-free lifting system on the market.

    Dual-hub cable sheaves
    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

    Multi-level locking positions
    The HD-7PXN is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

    Heavy-duty aircraft cable
    Each auto lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire car lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each vehicle lift for ultimate dependability, and all controls are conveniently located within close reach.

    Large base plates
    10" x 12" base plates provide a solid foundation for the HD-7P, four post lift.

    Single hydraulic cylinder
     
    Each vehicle lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted
    Leak proof cylinder technology, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Durable powder-coat finish
    All HD-Series vehicle lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

    Integrated design
    The HD-7PXN, four post car lift, was designed for professional use in service bays. Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

    Automatic safety locks
    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the car lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: contact@bendpakranger.co.uk

    • 7,000-lb. maximum lifting capacity
    • Super-tall lift
    • Runways include outside guide rails
    • Electric / hydraulic power system
    • Single hydraulic cylinder mounted underneath runway
    • Internal anti-sway slider blocks in each column
    • Oversized self-lubricating cable rollers
    • High-speed lifting
    • Features heavy-duty 3/8" aircraft cable
    • Rugged 1-1/4" roller axles
    • Multi-position safety locks in each column
    • Adjustable lock ladders
    • Runways feature non-skid surface
    • Push-button pneumatic safety release


    • Best Warranty Car Lifts - BendPak

      Safe balancing for BendPak car lifts

      How to choose the right car lift for you

      BendPak's Top 10 Car Lift Buyers Guide

    • Lifting capacity*: 7,000 lbs. / 3,175 kg
      • *Max capacity / front axle: 3,500 lbs. / 1,588 kg
      • *Max capacity / rear axle: 3,500 lbs. / 1,588 kg
    • Overall width: 99-3/4" / 2,534 mm
    • Outside length: 198" / 5,029 mm
    • Overall length: 224" / 5,690 mm
    • Height of columns: 158" / 4,011 mm
    • Runway min height: 4-1/2" / 114 mm
    • Max rise: 140" / 3,556 mm
    • Max lifting height: 145" / 3,685 mm
    • Width between posts: 89-3/4" / 2,280 mm
    • Runway width: 19" / 483 mm
    • Width between runways: 37-1/4" / 946 mm
    • Length of runways: 188" / 4,775 mm
    • Min wheelbase @ rated capacity: 135" / 3,429 mm
    • Min wheelbase @ 75% capacity: 115" / 2,921 mm
    • Min wheelbase @ 50% capacity: 95" / 2,413 mm
    • Min wheelbase @ 25% capacity: 80" / 2,032 mm
    • Locking positions: 30
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 45 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: contact@bendpakranger.co.uk

    BendPak HD-7PXN is super tall lift
    BendPak HD-7PXN is super tall lift
    Vehicle lift HD-7PXN safety release assembly
    Lift HD-7PXN floor plate
    HD-7PXN cylinder assembly
    HD-7PXN post brace assembly
    Car lift HD-7PXN power unit pump assembly
    Car lift HD-7PXN cable roller sheave assembly

    Featured accessories for the HD-7PXN


    What customers are saying about HD-7 Series Car Lifts by BendPak



    "I have a BendPak four post lift and couldn't work on cars without it."

    - oldmodman on svtperformance


    "I have a BendPak four post lift. It is about 4 years old and has a 7,000 pound capacity. I went with that one due to it's being 120v instead of 220 like all the heavier duty lifts...It has been trouble free."

    - oldmodman on svtperformance
    deliverydetails.jpg

    Request More Info on the HD-7PXN!

    Quick Specs

    Lifting capacity: 7,000 lbs.
    Overall width: 99-3/4"
    Overall length: 224"
    Height of columns: 158"
    Max rise: 140"
    Length of runways: 188"
    Motor: 220 VAC / 1 Ph
    View Full Specs »
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Feedback | Social Connect | FTP | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk