XR-12000 Quatra™ 12,000-lb. Capacity, Scissors Lift
XR-1200 Vertical scissor lift. The best car hoist has been coupled with the best warranty in the business.
Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas. At the same time, the unique quad-opposing scissors design eliminates restrictive arm structures found on other scissors, giving the technician an unprecedented freedom of movement beneath the hoist. The XR-12000 provides you full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom and efficiency than you thought possible beneath a car hoist.

    Quatra-Logo.png
    The Quatra™ XR-12000 Pantograph Scissors Lift

    The distinctive Quatra™ series scissors lift by BendPak™ revolutionizes the lifting industry by offering 12,000-pounds of uninhibited service capacity and true vertical lifting for a true vertical lifting path and a more compact footprint, better accommodating smaller service bays and work areas. The unique quad-opposing pantograph scissors design is void of restrictive arm structures usually associated with scissors lifts, providing car lift operators with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work efficiently, increasing productivity and most of all, your profits. No other scissors lifts on the market offer the freedom that BendPak's Quatra series hoists can provide your shop or garage.


    Make more money by going straight…up.

    Each BendPak Quatra™ series lift delivers straight-up vertical lifting, unlike parallelogram style scissors lifts that require more floor pace due to their lateral lifting characteristics. Because there is no forward or rearward movement, the result is a more compact footprint to accommodate smaller service bays and work areas.

    Compared to parallelogram car hoists and other traditional scissors lifts, the XR-12000 delivers:

    • Increased work space below the lift and around the runways
    • Unobstructed access points for easy entry and exit--front, rear and both sides
    • Wide open would-through for unhindered service

    Better by design
    With an excellent combination of speed and ergonomic design, BendPak’s Quatra series pantograph scissor lifts improve technician efficiency and productivity which helps you improve overall profitability. Featuring rapid rise and descent speeds, vehicles are positioned smoothly to any desired height with simple to operate controls. A sophisticated yet simple six‐cylinder master‐slave hydraulic circuit provides precise equalized lifting without the need for complicated electronics that often fail when subjected to high‐use and soiled work environments.

    The XR‐12000 incorporates a full‐menu of engineering and design enhancements that provide long term ruggedness and increased dependability. From the hydraulic cylinders and safety locking mechanisms, to fluid controls and pneumatics, all integral system components are enclosed within the runways to help protect them from harmful corrosives and operational damage. With few moving parts, and an uncomplicated fluid power system, BendPak’s Quatra’s offer the most economical and dependable method of lifting, delivering you many years of trouble free service.


    It’s all in the approach

    When it comes to positioning vehicles on the lift, there is no other car hoist on the market that makes it easier. Extendable, hinged, collapsible, and stowable approach ramps are an industry first. The extendable approach ramps deliver a range of motion from 59” all the way up to an incredible 76” overall length in mere seconds. Not only do these user favorites make it convenient to drive ground hugging cars on the lift, when space is tight, their collapsible and stowable design means you’re able to close the shop doors at the end of the day.

    Balanced Lifting
    Quatra lifts are equipped with an intelligent hydraulic regulating manifold featuring four, two‐position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

    Key Features

    • 12,000 lbs. lifting capacity.
    • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
    • Extendable, hinged, collapsible, and stowable approach ramps
    • Multi‐position runway work steps
    • Non‐skid runways provide sure grip for vehicles and technicians
    • Dependable electric/hydraulic power system ­­­­
    • Cylinders feature integrated velocity fuses to control sudden descent
    • Power console features simple operator controls
    • Open front design with clear center, sides and rear
    • Multi‐position automatic leveling system
    • Quad automatic safety locks with pneumatic push‐button release
    • Collapsible front tire stops clear for low vehicle skirts
    • Lubricated‐for‐life bearings on all pivot points
    • Rugged steel legs and formed steel runways
    • Turned, ground, polished and hardened zinc plated axle pins
    • Grease nipples on all moving pins and bearings
    • High efficiency hydraulic power unit provides faster raising and descent times
    • Easy access to hydraulic/electrical components for simple routine servicing
    • Easy to use and understand operator controls
    • Power unit console with easy access front panel
    • Can be flush mounted or recessed

    Optional Equipment
    Optional 6,000 pound capacity rolling jacks (model RJ‐6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety‐lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground‐clearance vehicles. The jacks come equipped with a commercial grade air‐hydraulic pump requiring a maximum pressure of 125 PSI and 10‐20 CFM.

    An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual jack purpose.

    For more than a decade, America's best car hoist has been coupled with the best warranty in the business. BendPak offers you better products, better service and better value. Check our 5-2-1 Warranty.

    XR-12000 Quatra flushmount concrete specs.

    Key Features

    • 12,000-lb. lifting capacity
    • Extended runway design for greater vehicle capacity
    • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
    • Extendable, hinged, collapsible, and stowable approach ramps 
    • Multi-position runway work steps 
    • Non-skid runways provide sure grip for vehicles and technicians 
    • Dependable electric/hydraulic power system 
    • Cylinders feature integrated velocity fuses to control sudden descent
    • Power console features simple operator controls 
    • Open front design with clear center, sides and rear 
    • Multi-position automatic leveling system 
    • Quad automatic safety locks with pneumatic push-button release 
    • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation 
    • Lubricated-for-life bearings on all pivot points 
    • Rugged steel legs and formed steel runways 
    • Turned, ground, polished and hardened zinc plated axle pins 
    • Grease nipples on all moving pins and bearings 
    • High efficiency hydraulic power unit provides faster raising and descent times 
    • Easy access to hydraulic/electrical components for simple routine servicing 
    • Easy to use and understand operator controls 
    • Power unit console with easy access front panel 
    • Can be flush mounted or recessed

    Optional Equipment
    • Optional 6,000-pound capacity rolling jacks (model RJ-6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.
    • An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual jack purpose.
    • The XR-12000A is equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

      /floorplan-button.jpg

    • How to choose the right car lift for you

      Safe balancing for BendPak car lifts

      BendPak's Top 10 Car Lift Buyers Guide

    • Lifting capacity: 12,000 lbs. / 5,443 kg
    • Overall width: 86" / 2,184 mm
    • Overall length / approach ramps extended: 269" / 6,831 mm
    • Overall length / approach ramps collapsed: 249" / 6,323 mm
    • Overall length / approach ramps stowed: 215" / 5,459 mm
    • Runway width: 24" / 610 mm
    • Width between runways: 40" / 1,028 mm
    • Length of runways: 192" / 4,875 mm
    • General service wheelbase: 171" / 4,343 mm
    • Min. runway height: 11-1/4" / 286 mm
    • Max. rise: 68" / 1,727 mm
    • Max. lifting height: 74" / 1,880 mm
    • Min. wheelbase @ rated capacity: 140" / 3,556mm
    • Min. wheelbase @ 75% capacity: 120" / 3,048 mm
    • Min. wheelbase @ 50% capacity: 100" / 2,540 mm
    • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
    • Locking positions: 13" apart
    • Standard Motor: 220 VAC / 60 Hz / 1 Ph

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: contact@bendpak.com.au

    XR-1200 Vertical scissor lift. The best car hoist has been coupled with the best warranty in the business.
    XR-1200 Vertical scissor lift. The best car hoist has been coupled with the best warranty in the business.
    XR-12000 vertical alignment lift cylinder
    XR-12000 vertical alignment hoist slip plates. BendPak has a variety of vehicle hoists.
    XR-12000 extendable and stowable drive-on ramps
    XR-12000 vertical alignment lift control box
    Accesorries available for the Quatra car lift.
    Side view of the BendPak Quatra alignment lift.

    Featured accessories for the XR-12000


    deliverydetails.jpg

    Request More Info on the XR-12000!

    Quick Specs

    Lifting capacity: 12,000 lbs.
    Overall width: 86"
    Overall length: 269"
    Max height: 74"
    View Full Specs »
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Feedback | Social Connect | FTP | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk