HD-9AE 9,000-lb. Capacity Alignment Car Lift
The HD-9AE four‐post lift provides 9,000-lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles.
    The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.
    • Multi-castor slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
    • Dual radius plate positions for better vehicle accommodation.
    • Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
    • Dual-hub cable sheaves reduce stress, fatigue and wear.
    • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
    • The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
    • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
    • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
    • Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
    • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
      Leak proof cylinder technology only available for BendPak four-post lifts
    • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
    • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
    • Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
    • A maintenance-free electric hydraulic power system assures ultimate dependability.
    • All operator controls are conveniently located within easy reach.
    • Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

    Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. For more information contact BendPak via: contact@bendpakranger.co.uk

    • 9,000-lb. maximum lifting capacity
    • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
    • Multi-caster slip plates
    • Dual radius plate positions
    • heavy-duty stainless steel lifting cables
    • Dual-hub cable sheaves
    • Grease nipples on every sheave and sheave axle
    • Single hydraulic cylinder
    • Integrated hydraulic flow restrictor
    • Durable powser coat finish
    • Spring-loaded safety locks
    • Simple push-button lock release
    • Aircraft-quality stainless steel and aluminum pneumatic cylinders
    • Secondary lock system
    • Fully enclosed cables, airlines, safety latches and sheaves
    • Multiple adjustable height locking positions
    • Maintenance-free power system
    • Easy-to-reach operator controls
    • Non-skid runways



    • How to choose the right car lift for you

      Safe balancing for BendPak car lifts

      BendPak's Top 10 Car Lift Buyers Guide

    • Overall width: 127" / 3,226 mm
    • Outside length: 198" / 5,029 mm
    • Overall length: 224" / 5,690 mm
    • Height of columns: 88" / 2,235 mm
    • Runway min height: 6-1/2" / 165 mm
    • Max rise: 70" / 1,778 mm
    • Max lifting height: 76-1/2" / 1,943 mm
    • Width between posts: 117" / 2,972 mm
    • Runway width: 19" / 483 mm
    • Width between runways: 40" / 1,016
    • Length of runways: 188" / 4,775 mm
    • Min. wheelbase @ rated capacity: 135" / 3,429 mm
    • Min. wheelbase @ 75% capacity: 115" / 2,921 mm
    • Min. wheelbase @ 50% capacity: 95" / 2,413 mm
    • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
    • Locking positions: 12
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 60 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

    *Not all BendPak car lift models meet the standards as prescribed by European Standard EN 1493-(current edition). User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. For more information contact us via: contact@bendpakranger.co.uk

    BendPak HD-9AE Four-Post Alignment Lift
    BendPak HD-9AE Four-Post Alignment Lift Slip Plates
    BendPak HD-9AE Four-Post Alignment Lift Sliding Jack Rolling Jack
    HD-9AE Four Post Alignment Hoist turn Plates

    Featured accessories for the HD-9AE


    deliverydetails.jpg

    Request More Info on the HD-9AE!

    Quick Specs

    Lifting capacity: 9,000 lbs.
    Overall width: 127"
    Overall length: 224"
    Height of columns: 88"
    Max rise: 70"
    Length of runways: 188"




    CE-certification.jpg

    View Full Specs »
    ©2012 BendPak, Inc. All rights reserved. Site Map | Policies | Feedback | Social Connect | FTP | Español | Français | 日本 | العربية
    SEO Friendly CMS by Pixelsilk